Warning & Safety Reminder

Safety must be considered a basic factor in machinery operation at all times. Most accidents are the results of carelessness or negligence. All rotating power transmission products are potentially dangerous and must be guarded by the contractor, installer, purchaser, owner, and user as required by applicable laws, regulations, standards, and good safety practice. Additional specific information must be obtained from other sources including the latest editions of American Society of Mechanical Engineers; Standard A.N.S.I. B15.1. A copy of this standard may be obtained from the American Society of Mechanical Engineers at 345 East 47th Street New York, NY 10017 (212705-7722). It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the parts or components manufactured and supplied by Thomas Conveyor, Inc., in such a manner as to comply with the Williams-Steiger Occupational Safety Act and with all state and local laws, ordinances, regulations, and the American National Standard Institute Safety Code.

Caution

All OSHA Lock Out/Tag Out procedures are to be properly followed prior to removal of any guards, access doors or covers for inspection or general maintenance. Failure to follow these instructions may result in severe personal injury and/or property damage.

Notice

Troubleshooting guidelines are to be used as a general rule of thumb to fix common problems associated with material handling equipment using Thomas Conveyor products. These guidelines are in no way intended to replace, supersede or override equipment manufacturer’s installation and operating guides. Thomas Conveyor publishes this information to be used by trained professionals. There is no warranty or guarantee either expressed or implied with respect to the troubleshooting guidelines. In no event shall Thomas Conveyor be held liable for any damage to equipment arising from the use of these guidelines, or failure to follow the equipment manufacturer’s installation and operating guide. The safety reminder and cautionary note is not meant to be a comprehensive analysis of all potential safety hazards, and is provided solely to call your attention to general safety concerns when operating power transmission and material handling equipment. Thomas Conveyor accepts no responsibility for any failure to follow the safety recommendations noted above. For specific troubleshooting recommendations concerning any product Thomas Conveyor sells, please contact us.